Complete Vessel Structure Modeling and Part Nesting by Autoship
Autoship Systems Corporation (ASC) has developed a complete CAD/CAM suite to meet the CAD/CAM needs in marine vessel design and construction, including two key programs in the CAD/CAM suite: Autostructure 3.0 and Production Manager 3.0. Autostructure and Production Manager are key components in the Autoship CAD/CAM suite, offering shipyards complete solutions in structural design, pre-construction drawing preparation and part nesting.
Autostructure is used to create a 3D model of a vessel structure and to output the parts of that model in CAD format. The CAD representation can be used either to prepare construction drawings or for input to NC cutting processors. Autostructure utilizes an Autoship-generated hull and/or superstructure and can also include the shell plate information created in Autoplate. (Autoship and Autoplate are programs in the Autoship Systems CAD/CAM suite.
Autostructure was designed to allow parts to be created quickly and with minimal input. While there is a general workflow.
no set ways or sequences are forced upon the user. And since parts can be generated rapidly, mistakes can be quickly and easily remedied. Also, if a part is changed or moved.
Autostructure can update the surrounding structure.
Autostructure has an interface with the piping design system "AutoPLANT" by Bentley Systems Inc. Data exchange between the two programs allows for coordination of design between piping designers and structure designers, hence avoiding costly rework tin the vessel construction site.
All parts designed in Autostructure can be imported into Production Manager for nesting and related processing.
Production Manager provides sheet and linear (extrusion, flat bar) nesting, part subdivision, weld shrinkage compensation.
stock definition, stock inventory and stock remnant management.
Together. Autostructure and Production Manager provide complete control over vessel structure design and nesting, plus integration with third party piping. These components have completed the ASC CAD/CAM suite.
C i r c l e 4 3 on R e a d e r S e r v i c e C a rd
Other stories from July 2004 issue
- Ballast Water Management Acquiring Teeth page: 9
- ABS Guidance for Ballast Tank Inert Gas Systems page: 11
- New Crowley Tug Joins Fleet page: 12
- Hawaiian Catamaran: Environmental Awareness In Comfort page: 13
- Lake Express Vessel Enters Service page: 14
- ARL Releases ShipConstructor2005 page: 16
- Complete Vessel Structure Modeling and Part Nesting by Autoship page: 16
- PCU Jimmy Carter Christened page: 21
- And Then There Were Two page: 22
- Offshore Drilling: 5-Year Projection is $189B page: 24
- USCG Accelerates OPC Program page: 24
- Cianbro earns Maritime Stripes page: 26
- German RoRo Bastion page: 29
- Rigdon Marine: PSV Orleans Now Working page: 34
- MAN B&W Debuts 32/40CR Engine in Austria page: 37
- Hoegh Fleet Assessed $ 3 . 5 M Waste Dumping Fine page: 40
- Secure Seas, Open Ports page: 42
- Implementing the Strategy page: 44
- In U.S. Waters & On U.S. Shores page: 46
- Joint Bulker Project Seeks Industry Input page: 55